Residential service
Whole-Home Remodeling in Phoenix
Renovate the full house as one project instead of a series of disconnected rooms.
The scope
One scope instead of six separate jobs.
A whole-home renovation touches finishes, layout, mechanical systems and often structure at the same time. Running it as a single scope keeps the sequencing, the trade overlap and the finish decisions consistent from the first room to the last.
Discuss your whole-home renovations projectWork may include
- Existing-condition and systems review
- Layout and circulation planning
- Mechanical, electrical and plumbing coordination
- Interior and exterior finish scope
- Phasing for occupied or vacated homes
Worth reading first
Drop-In Tub vs Alcove Tub: How to ChooseSpace, framing, plumbing access and upkeep — the practical differences between the two, and which suits which bathroom.
Phoenix Bathroom Renovation: What Actually Decides the OutcomeThe sequence, the waterproofing, and the decisions that set the budget before a single tile is chosen.
Shower Niche Size and Placement: A Practical GuideHow deep it can be, how big to build it, where it belongs, and the waterproofing detail that decides whether it lasts.
The Ultimate Guide to Stress-Free Remodeling & ADU Builds in ArizonaWhat goes wrong on residential projects, what a well-run build looks like, and the questions to ask before you sign.
Bring these details
- Rooms and systems in the scope
- Whether the home stays occupied during work
- Known problems in the existing house
- Finish level and budget range
- Any deadline driving the schedule
How these projects usually run
General points that apply to most projects of this kind. Confirm the specifics for your property when you request an estimate.
- Can we live in the house during a whole-home remodel?
- Often, if the work is phased. The common approach is to keep one bathroom and a basic kitchen setup working while other areas are under construction, then switch. Phasing adds some time and coordination; moving out shortens the schedule and simplifies dust and utility shutoffs.
- In what order does a whole-home remodel happen?
- Structure and layout changes first, then plumbing, electrical and HVAC rough-in, then inspections, insulation and drywall, then cabinets, tile, flooring, paint and trim. Finish selections still need to be made early, because long-lead items such as cabinetry and windows set the dates everything else follows.
- Is it cheaper to remodel everything at once?
- Usually per room, yes. One mobilization, one permit set and shared trade visits cost less than the same work spread across separate projects. The trade-off is a larger single budget and more of the house out of service at once.
- What should be checked before pricing a whole-home remodel?
- The electrical panel capacity, the supply and drain lines, the age and condition of the HVAC system and roof, and in older homes lead paint and asbestos. These decide how much of the budget goes behind the walls before any finish is chosen.
What a whole-home remodel in Phoenix usually involves
Most of the Valley was built fast and in waves, so a house tends to reach renovation age all at once: the original kitchen, bathrooms, flooring, windows and mechanical systems come due within a few years of each other. Treating them as one remodel lets the demolition, rough-in, inspections and finish work run in a single sequence instead of opening the same walls three times.
The scope usually starts with what cannot be seen. Phoenix-area homes are almost all built slab-on-grade, so any change to where a kitchen or bathroom drains means cutting and trenching the slab. Homes built from the late 1970s into the mid-1990s may carry polybutylene supply lines, which are widely replaced during a remodel rather than left behind finished walls. Older electrical panels often cannot carry a modern kitchen, a larger HVAC system or an EV charger without an upgrade.
Older homes: the assessments that belong in the schedule
In homes built before 1978, federal rules require lead-safe work practices from a certified renovation firm whenever painted surfaces are disturbed. Textured ceilings and some flooring adhesives from that era can also contain asbestos and should be tested before demolition. Neither is unusual, and neither has to be a surprise: both belong in the plan before the first wall comes down.
Permits from the City of Phoenix
Cosmetic work generally proceeds without a permit, but moving plumbing, adding circuits, changing gas lines, altering structure or replacing mechanical equipment brings a remodel under the City of Phoenix Planning and Development Department. A whole-home scope almost always touches at least one of those, so the permit set, the inspections it triggers and the order they happen in become part of the schedule.
Joel personally offered that they had some flooring (luxury vinyl) that was left over from a large project and offered to give it to us at no cost… I’m forever grateful to work with a company that not only does great work at a fair price, but most importantly a company that truly cares about their clients.
Christian from Blackstone was great throughout the whole process communicating with us along the way. The group was able to be on-time and on-budget!
Blackstone Contracting Group is based in Peoria and serves Greater Phoenix.