Residential service
Bathroom Remodeling in Phoenix
Primary suites, guest baths and powder rooms, rebuilt around waterproofing that has to be right the first time.
The scope
Small rooms with no margin for a detail missed.
A bathroom packs plumbing, electrical, tile, ventilation and waterproofing into the smallest room in the house, and the one detail that cannot be corrected later is the one buried first. Shower pans, membranes and substrate go in before anything visible does, which is why the sequence matters more here than the finishes do.
Discuss your bathroom remodeling projectWork may include
- Demolition and existing-condition review
- Shower pan, membrane and waterproofing
- Plumbing and electrical rough-in
- Ventilation and moisture management
- Tile, glass and finish carpentry
- Vanity, fixture and hardware installation
Worth reading first
Drop-In Tub vs Alcove Tub: How to ChooseSpace, framing, plumbing access and upkeep — the practical differences between the two, and which suits which bathroom.
Phoenix Bathroom Renovation: What Actually Decides the OutcomeThe sequence, the waterproofing, and the decisions that set the budget before a single tile is chosen.
Shower Niche Size and Placement: A Practical GuideHow deep it can be, how big to build it, where it belongs, and the waterproofing detail that decides whether it lasts.
Bring these details
- Which bathrooms are in the scope
- Whether fixtures are moving or staying put
- Tile, vanity and fixture direction
- Whether the household has another bathroom to use
- Accessibility requirements, now or later
How these projects usually run
General points that apply to most projects of this kind. Confirm the specifics for your property when you request an estimate.
- Do I need a permit to remodel a bathroom in Phoenix?
- Replacing a vanity, toilet or tile in place generally does not need one. Moving plumbing, adding circuits, changing ventilation or altering walls generally does, through the City of Phoenix or your own city. Confirm the requirement for your exact scope before work starts.
- How long does a bathroom remodel take?
- A straightforward remodel with fixtures staying in place often takes a few weeks of construction once materials are on site. Moving fixtures, cutting the slab or waiting on custom glass and vanities adds time. Most of the schedule risk sits in selections and deliveries rather than the work itself.
- Can a tub be replaced with a walk-in shower?
- Yes, and it is the most common bathroom remodel in the Valley. Expect the drain to be enlarged to shower size, new waterproofing, and, for a curbless entry, the slab recessed or sloped. It is worth keeping at least one tub in the house if resale to families matters to you.
- What makes a bathroom accessible?
- A curbless or low-threshold shower, wall blocking for grab bars, a bench or seat, a handheld shower on a slide bar, slip-resistant tile, wider doorways and a comfort-height toilet. Blocking is cheap to add while walls are open and expensive to add later, so it is worth including even if grab bars are not needed yet.
- How do I keep one bathroom usable during the remodel?
- In a home with more than one bathroom, remodel them one at a time so one always works. In a single-bathroom home the schedule is tighter and the plumbing is usually reconnected at the end of each working day where possible.
What a bathroom remodel in Phoenix actually involves
Most bathroom remodels in the Valley start with the same goals: replace a tub with a walk-in shower, update a dated vanity and tile, and make the room easier to use for years to come. What decides the outcome is the work that disappears first. Under the tile is a shower pan, a waterproof membrane and the substrate it sits on, and once the tile is set none of it can be corrected without tearing the room out again.
Because nearly every home here is built slab-on-grade, moving a toilet, a shower drain or a vanity means cutting the concrete floor. Keeping fixtures roughly where they are is the single biggest lever on cost and schedule. Where they do move, the original drain lines are usually inspected while the slab is open, because what is found there often decides whether the rest of the run is replaced too.
Tub-to-shower conversions and walk-in showers
Converting a tub to a shower is the most requested bathroom project in the Valley, and it is more than a swap. Plumbing codes generally call for a larger drain on a shower than on a tub, so the drain is usually enlarged. A curbless or low-threshold shower on a slab needs the floor recessed or sloped so water stays in the shower, which is a concrete job before it is a tile job. Done properly, it is also the most effective accessibility upgrade a bathroom can get.
Hard water and heat
Phoenix-area water is among the hardest in the country. Scale builds on glass, grout and fixture finishes, so finish choice, glass coatings and whether the home has a softener all affect how a new bathroom looks a few years in. Ventilation matters too: an exhaust fan sized and ducted to the outside, not into the attic, is what keeps moisture out of the ceiling and the paint.
They built a custom handicap-accessible bathroom for my dad, who has dementia, and the experience was truly exceptional… they were incredibly helpful, guiding me through every step and ensuring the bathroom met all accessibility needs while looking beautiful.
Joel personally offered that they had some flooring (luxury vinyl) that was left over from a large project and offered to give it to us at no cost… I’m forever grateful to work with a company that not only does great work at a fair price, but most importantly a company that truly cares about their clients.
Christian from Blackstone was great throughout the whole process communicating with us along the way. The group was able to be on-time and on-budget!
Blackstone Contracting Group is based in Peoria and serves Greater Phoenix.